Multiflow System Installation:
- First lay out the pots and set them on a level surface.
- Then connect the pots, Brain pot and reservoir tank together using the various fittings and tubing included.
- Once
you have done this, plug the power cord of the pump in the
reservoir into the controller unit and set your watering times. Installation is now complete.
The operation of the multiflow system is very simple:- When
the timer reaches the watering time you have selected, the pump turns
on inside the reservoir pumping nutrient solution into the controller
unit.
- The controller is connected to the pots via a supply tube, linking all the pots together at the base.
- As the controller starts to fill, nutrient will flow from the controller, down the supply tube and into each pot.
- Once the desired fill level in the controller is reached, a
float switch cuts the power to the pump in the reservoir. All the pots will now be flooded with nutrient.
- The float switch maintains
the fill level in the controller tank until the timer on the controller switches off.
- Once
the timer turns off, the pump inside the controller is engaged and the
nutrient is then pumped back into the reservoir. This will continue
until the nutrient level reaches the preset drain depth, and then the pump
will turn off.
- At this point all the nutrient has drained from each pot, and the plant roots will have been replenished with fresh nutrient and oxygen.
Brand Name
